Tue. Mar 28th, 2023

Over time, the worlds of solar power, nuclear power, smart grids, electric vehicles, rail transportation, aerospace, aviation, and navigation have continued to evolve. Therefore, this trend has increased the requirements for the efficiency of electrical equipment. These days, the first generation of silicon materials is hitting the theoretical limit that was originally set. The third generation includes wider bandwidth, electron saturation, and thermal conductivity. In this article, we are going to talk about a new type of material called silicon carbide ceramics. And we will specifically discuss the use of silicon carbide ceramics in various industries. Read on to know more.


As far as capacity is concerned, silicon carbide ceramic is the most solid choice. In fact, many of its indicators are much better than silicon. For example, it has 300% more bandwidth. Also, the theoretical operational temperature of this material is 600 Celsius. Now, let’s talk about the different uses of this material.

Read more>>www.sykescottages.co.uk at Sykes Owner Portal Login Guide 2022

Electric vehicles


Since these modules can have sustainable, intelligent, low-carbon, and green development, we can say that the advantages of this material are mainly shown in the following three aspects.


  1. Simplification of the electricity supply network and increase in frequency


  1. Reduce temperature rise and losses


  1. Improving efficiency and reducing the volume


As for power conversion, components made of silicon carbide can help improve performance. In electric models, the active load-bearing component is the electric motor. These motors have different rotational speeds. Therefore, these motors require frequent acceleration and deceleration during the driving process. Therefore, the working condition is more complicated than the speed regulation system.


Transmission systems


If you have a silicon-based device, your best choice is switches made of silicon carbide. This is because the resistivity of this material is extremely low. Therefore, it is an ideal choice for applications where high frequencies and temperatures are involved.


The thing is, this material can reduce power loss by 500%. Moreover, it is possible to reduce weight and size by more than 40 percent. Therefore, it can help to positively influence the adjustment of grid configuration and energy strategy.


Solar Energy Field


If you are looking for tips that can be used in solar inverters, silicon carbide is an ideal choice. It comes in small size, low cost, and high efficiency. Typically, these inverters have a conversion efficiency of around 96%. But if silicon carbide is used, it is possible to increase its efficiency to 97.5%. In other words, these devices can help generate up to 25 percent of power losses. In addition, these inverters can help increase conversion efficiency significantly.


The light of L-E-D


These days, LED devices using silicon carbide are growing in popularity. The thing is, these LEDs are much brighter and can reduce the cost by up to 50%. They are 200% brighter than other types of lights.


Similarly, they have 10 times higher thermal conductivity. In normal life, you can apply this type of lighting to a variety of environments, such as color display devices, information screens, indoor lighting, and signal lights. The point is that they can help reduce pollution and costs.


Briefly, these are four uses of silicon carbide ceramics in various industries.

By Admin

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!